This program file is already keyed. If you wish to install a new key, please use an original copy of the program.[.KC-970.]
This program file has executable information for both the Power Macintosh and older Mac models. The Power Mac portion is already keyed, and the part for older Macs might be a “stub” that simply issues a warning.[.KC-950.]
KeyConfigure does not have enough memory to install a key into this program. An additional ^1 is required. Increase the amount of memory allocated to KeyConfigure in its Get Info box.[.KC-960.]
This program file has executable information for both the Power Macintosh and older Macintosh models. The code for older Macs might not contain the actual program, but instead a “stub” that simply issues a warning message.[.KA-940.]
KeyConfigure has to use its Double Overlay patch because this program is not of the proper format. Make absolutely sure you are keying an original copy of this program.[.KC-275.]
KeyConfigure could not place the Zero Footprint patch into this program without enlarging it by a small amount. This should not cause problems, but does make the patch visible to the host program.[.KC-270.]
This Demonstration copy of the KeyServer will only allow 10 Controls to be installed at one time. If you want to Install a new Control, you must first Delete one of the existing Controls and then restart the KeyServer machine.[.KC-260.]
This KeyConfigure program is damaged. Please quit now. Contact Sassafras Software to arrange the return of the damaged copy and to obtain a replacement.[.KC-250.]
A needed resource could not be loaded into memory. KeyConfigure cannot create keyed programs until you give it more memory and re-launch.[.KC-240.]
The Controls could not be copied because the disk that the destination Controls window is on is full.[.KC-170.]
The Controls could not be copied because the destination Controls window is locked.[.KC-160.]
The Controls file could not be written because there is no more space left on the disk. Free up some space on the disk, or save on another disk.[.KC-150.]
The new Controls file could not be created. Try saving it with a different name.[.KC-140.]
The Controls file could not be opened due to an internal error. Try opening a copy of the Controls file.[.KC-130.]
KeyConfigure is running low on memory, so it cannot open a new window. Close another window and try again.[.KC-120.]
A new Control file named “^1” could not be created. Make sure the disk is not locked, and that there is some free space.[.KC-110.]
This symbol means the Controls file is locked or read-only, so you can not make any changes to its Controls. You can still view and Copy Controls, but you can not Paste, Cut, or Edit the Controls.[.KC-20.]
The Controls file is locked or read-only, so you will not be able to make any changes to its Controls. You can still view and Copy Controls, but you will not be able to Paste, Cut, or Edit the Controls.[.KC-10.]
